Beaded Trim



Beaded Trim
What goes good with terra cotta walls?

I am redoing my kitchen. I have bead board below chair rail. Painting the top with terra cotta. All my trim is white. Cabinets are light oak. Can I leave the bead board white or do I need to use another color?

You could leave it white, but with the oak cabinets it may look alittle stark. How about a creamy shade like very light buttery yellow just to soften it up some.

How To Add Bead Fringe * The Hope Fairy * by Beth Murr



1/4 x 3/8 V Type Slotting Cutter Carpenter Tool Silver Tone Blue


1/4 x 3/8 V Type Slotting Cutter Carpenter Tool Silver Tone Blue


$9.95


Used for routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming. Please pay attention to the size before ordering to avoid buying wrong item.

11-Light Antique Reproduction Beaded Chandelier with Hand Polished Crystal Trim


11-Light Antique Reproduction Beaded Chandelier with Hand Polished Crystal Trim


$800


11-Light Antique Reproduction Beaded Chandelier with Hand Polished Crystal Trim

14K Two Tone Gold Beaded Style Lace Trimmed Cross Pendant


14K Two Tone Gold Beaded Style Lace Trimmed Cross Pendant


$68.99


14K Two Tone Gold Beaded Style Lace Trimmed Cross Pendant

14K Yellow Gold Rhodium Plated Filigree D/C Beaded Trim Infinity Cross Pendant


14K Yellow Gold Rhodium Plated Filigree D/C Beaded Trim Infinity Cross Pendant


$138.99


Dimensions: Charm Length:47mm Charm Width:30mm Diamond-cut Polished Open back 14K Yellow gold & rhodium Textured rhodium-plated-yellow-gold

22K Gold Plated Barrel Cord Ends With Rings 8.5mm Long - Fits 3.5mm Cord (6)


22K Gold Plated Barrel Cord Ends With Rings 8.5mm Long – Fits 3.5mm Cord (6)


$4.49


These gold-plated brass barrel end caps are excellent for ending cords and attaching clasps to necklaces and bracelets! Simply dab some glue inside cord end and insert the trimmed end of the cord completely through to the end of the cap. We recommend our Zap-a-Gap glue for most types of cord. Measurements: 8.5mm long, 4mm outer diameter. The ring has an outer diameter of 2.8mm and a 1.5mm inner diameter. Will fit up to 3.5mm cord. Quantity: 6 Pieces

22K Gold Plated Foldover 3mm Cord Ends For Leather (X50)


22K Gold Plated Foldover 3mm Cord Ends For Leather (X50)


$5.29


Approximately 9mm total length. Use these professional quality real gold-plated brass cord ends to finish off cord up to 3mm thick. Perfect for the latest leather, pleather, silk and satin cord necklaces. Simply lay the trimmed end of the cord in the metal crimp end (see photo at left), and use jeweler’s pliers to fold down and flatten one side, then the other of the metal. For extra security, especially if the cord is thinner than 3mm x 2mm in diameter, put a drop of GS Hypo Cement into the metal cord end before inserting the cord and crimping. How did you live without these? We also carry silver plated cord ends in this size. This item is LEAD-FREE

30 Degree 1/2 Shank Dia 3/4 Cutting Length Horse Nose Router Bit


30 Degree 1/2 Shank Dia 3/4 Cutting Length Horse Nose Router Bit


$15.12


Carbide cutting tips to ensure a sharp and long lasting cut. Suitable for various woodwork cutting technics, like routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming.

35mm Length Woodworking Tool 1/4 x 5/16 V Type Grooving Bit 2pcs


35mm Length Woodworking Tool 1/4 x 5/16 V Type Grooving Bit 2pcs


$12.94


Used for routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming. Please pay attention to the size before ordering to avoid buying wrong item.

6mm Shank 10mm Cutting Dia 90 Degree Woodworking V-Groove Router Bit


6mm Shank 10mm Cutting Dia 90 Degree Woodworking V-Groove Router Bit


$12.74


V-Groove Bit is designed to cut deep or shallow V grooves.V-Groove Bit is designed to give excellent smoothness of cut and balanced cutting with minimal vibration. Used for routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming. Please pay attention to the size before ordering to avoid buying wrong item.

6mm Shank 16mm Cutting Dia 120 Degree Woodworking V-Groove Router Bit


6mm Shank 16mm Cutting Dia 120 Degree Woodworking V-Groove Router Bit


$12.74


V-Groove Bit is designed to cut deep or shallow V grooves.V-Groove Bit is designed to give excellent smoothness of cut and balanced cutting with minimal vibration. Used for routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming. Please pay attention to the size before ordering to avoid buying wrong item.

6mm Shank 22mm Cutting Dia 120 Degree Woodworking V-Groove Router Bit


6mm Shank 22mm Cutting Dia 120 Degree Woodworking V-Groove Router Bit


$14.36


V-Groove Bit is designed to cut deep or shallow V grooves.V-Groove Bit is designed to give excellent smoothness of cut and balanced cutting with minimal vibration. Used for routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming. Please pay attention to the size before ordering to avoid buying wrong item.

6mm Shank 32mm Cutting Dia 90 Degree Woodworking V-Groove Router Bit


6mm Shank 32mm Cutting Dia 90 Degree Woodworking V-Groove Router Bit


$15.83


V-Groove Bit is designed to cut deep or shallow V grooves.V-Groove Bit is designed to give excellent smoothness of cut and balanced cutting with minimal vibration. Used for routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming. Please pay attention to the size before ordering to avoid buying wrong item.

8-in Door Pull


8-in Door Pull


$70


8″ x 3/4″ Beaded Drawer PullAllied Brass is proud to offer the latest contemporary center to center trim, auxiliary door, cabinet and refrigerator pull hardware products for the kitchen and bath. These solid brass pulls are available in many different center-to-center measurements, in a variety of designs and finishes that not only look great, but also provide long-lasting wear in any application. Each versatile pull makes it easy to coordinate the look and feel of your interior design with easy to install options for invisible mounting. Product is made to order.

8-in Door Pull


8-in Door Pull


$70


8″ x 3/4″ Beaded Drawer PullAllied Brass is proud to offer the latest contemporary center to center trim, auxiliary door, cabinet and refrigerator pull hardware products for the kitchen and bath. These solid brass pulls are available in many different center-to-center measurements, in a variety of designs and finishes that not only look great, but also provide long-lasting wear in any application. Each versatile pull makes it easy to coordinate the look and feel of your interior design with easy to install options for invisible mounting. Product is made to order.

Aidan Mattox Beaded Fringe Trim Cocktail Dress


Aidan Mattox Beaded Fringe Trim Cocktail Dress


$227


Covered in sparkling hand-applied beads, a striking party dress edged with fringe for an ultra-feminine finish. Round neckline. Cap sleeves. Fringe-trim hem. Concealed back zip.

Air Force Falcons Padded Swivel Bar Stool with Back


Air Force Falcons Padded Swivel Bar Stool with Back


$186.47


This officially licensed chrome bar stool with back will provide you and your guests with a comfortable seat as well as a stylish accent to your game room, garage or collection. The stools seat features an authentic logo highlighted by resilient marine grade vinyl sides trimmed with quarter inch vinyl beading. The seat also includes luxurious foam padding and a 360 degree swivel. The seat back provides added support and extra comfort. Chrome double rung reinforced legs are made of tubular steel that is both lightweight and durable. Bring style, function and comfort to your game room, garage or collection with an officially licensed chrome bar stool with back. Product

Alex Toys DIY Pom Tassler Craft Set


Alex Toys DIY Pom Tassler Craft Set


$19.99


Alex DIY Pom Tassler lets a craft-loving fashionista spin yarn into Pom Poms and Tassels super-fast. Make fashion accessories, keychains, toys and so much more. Your Pom Poms and Tassels will always be the perfect color to match any project because you spin them yourself. Just load yard into the Pom Tassler machine, squeeze the handle to spin, tie, cut and trim your fuzzy accessories into 3 sizes. Includes Pom Tassler machine, 2 pegs, yarn clip, 3 Pom Pom templates, 10 yards (9.14 meter) acrylic metallic yarn, 10 yards (9.14 meter) each of 4 colors of acrylic yarn, 8.74 yards (8 meter) cotton embroidery floss, 8.74 yards (8 meter) acrylic metallic embroidery floss, plastic needle, beading needle, 5 jump rings, 25 plastic beads, 2 keychains and easy instructions. From its beginnings in 1986, ALEX Toys has grown into the preeminent manufacturer of kids’ art supplies & creative products, inspiring children of all ages, from infant to tween. ALEX Toys offers quality, innovative & trendy toys for bath time, preschoolers, fashion & jewelry, and imaginative, dramatic play. And for baby, there’s ALEX Little Hands and ALEX Jr, a line of luxurious plush & bath products, too!

American Lighting X4-WHM-WH-X34 4 in. Insert For X34 Series, White Multiplier And White Trim


American Lighting X4-WHM-WH-X34 4 in. Insert For X34 Series, White Multiplier And White Trim


$15.19


Features Suitable for use in wet locations Trim kits easily attach via the twist-lock design and include affixed torsion clips or torsion springs Large selection of interchangeable trim colors Sizes in 4 and 5 in. 4 in. trims are compatible with AL4-ICAT and most standard 4 in. cans Update your recessed lighting system with these popular and stylish interchangeable trim kits Series – X34 Finish – White

Anderson 066-12575 4 in. x 1 in. Trim Stringer-Bead Twist-Knot Wheel


Anderson 066-12575 4 in. x 1 in. Trim Stringer-Bead Twist-Knot Wheel


$67.99


Aggressive, high-impact action enables quick and easy surface preparation and rough cleaning. Tempered-steel wire. Aggressive, high-impact action. Tempered-steel wire. Includes: .

Anderson Brush 066-11145 Stcm102.020 Knot Type Wire Wheel Brush


Anderson Brush 066-11145 Stcm102.020 Knot Type Wire Wheel Brush


$111.11


Specifications. Arbor Thread – TPI or Pitch; ;8 in. – 11. Diameter; 4 in. Speed; 20000 rpm [Max]. Structure; Stringer Bead Twist Knot. Trim Length; ;8 in. Wire Material; Carbon Steel. Wire Size; 0.0200 in.

Leave a comment

Your comment