Glass Tile



Glass Tile
How do you extend electrical outlets to be flush with glass tile backsplash.?

I am installing a mosaic glass tile backsplash in my kitche. There are 3 electrical outlets along with 1 light switch that I need to tile around. I am looking on how to extend the outlets out so they are flush with the tile once the backsplash is completed so the face plates fit on. Any ides?

Depends on how deep the box is right now. If you are adding no more then 1/2″ or so, turn the breaker off, remove the receptacles and switch, tile up to the opening in the box, then reinstall them. The ears on the receptacles should keep it flush with the surface, and the screws should be long enough to reach the holes in the box. If your tile will be deeper than that, you can get an extension ring from your local home center or electrical supply house. Screw that to the existing, then install the receptacles and switch. Hope this helps.

Install a Glass Tile Backsplash



1 Diamond Coated Hole Saws Glass Drill Bit Set 5 Pcs


1 Diamond Coated Hole Saws Glass Drill Bit Set 5 Pcs


$48.54


1 Diamond Coated Hole Saws Glass Drill Bit Set 5 Pcs. This is a new set of 5 diamond coated hole saws. These are great for filing glass, ceramics, tile, brick, plastics, wood, fiberglass, stone, rock carbide, gold, platinum, silver, metals or anything else that is hard. Longevity is assured as the diamond particles are electroplated onto the surface of the metal. Recommended for jewelers, lapidary, hobbies, crafts, modeling, home repair, etc. Each hole saw measures approximately 1 (25.5 mm) in diameter with a 1/4 (6.5 mm) shank.

1.2 Diameter Hole Saw Drilling Tool Cutter for Glass Tile


1.2 Diameter Hole Saw Drilling Tool Cutter for Glass Tile


$9.34


Suitable for drilling marble, tile, glass, granite, stone, ideal replacement for the old or damaged ones.

1/2in Glass/Tile Drill Bit


1/2in Glass/Tile Drill Bit


$14.24


Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8″ or larger drills. PROFESSIONAL QUALITY CARBIDE-TIPPED Carded Dia. xOA Lgth. Ins.=1/2 x 3-7/8

1/4 6mm Diameter Tile Glass Marble Diamond Coated Drill Bit Hole Saw Tool


1/4 6mm Diameter Tile Glass Marble Diamond Coated Drill Bit Hole Saw Tool


$7.96


Specification: Description: Diamond coated tip and sturdy metal body, gives good performance and longer life. Designed for drilling 1/4 diameter holes. Used on glass, , tile, limestone, slate, marble, granite, stone, and fiberglass. Works better with an electric drill which is not included here.

1/8in Glass/Tile Drill Bit


1/8in Glass/Tile Drill Bit


$8.47


Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8″ or larger drills. PROFESSIONAL QUALITY CARBIDE-TIPPED Carded Dia. xOA Lgth. Ins.=1/8 x 2-1/4

10 Diamond Burs Lapidary Rock Grinding Tool fits Dremel


10 Diamond Burs Lapidary Rock Grinding Tool fits Dremel


$7.53


10 New Diamond Coated Burs. This is a new set of 10 assorted diamond coated burs. They can be used with a Dremel tool. These are 150 grit. This master diamond bur set allows you to shape, grind and finish with precision. Great for filing glass, ceramics, tile, brick, plastics, wood, fiberglass, stone, rock carbide, gold, platinum, silver, metals or anything else that is hard. Recommended for jewelers, lapidary, hobbies and crafts, modeling, home repair, etc. Provides uniform cutting on wide a variety of materials. Use water for lubricant. All have a 1/8 (3 mm) shank. FindingKing works hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.

10 Pcs Household Rectangle Rags Dish Cleaning Scouring Sponge Scrub Pads


10 Pcs Household Rectangle Rags Dish Cleaning Scouring Sponge Scrub Pads


$6.19


Ideal for dishes, bowls, tiles, pans, glasses, milk bottles, vase, cup, mugs or other kitchenwares. 10 Pcs Rectangle Scourer Cleaning Pads colored in Green. Good help to housewife. California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

100mm Single Side Fine Grits Electroplated Diamond Coated Cutting Disc Tool


100mm Single Side Fine Grits Electroplated Diamond Coated Cutting Disc Tool


$11.37


High quality diamond coated, fine grits, single side coated. Specially designed for cutting tile, glass, ceramic, porcelain, carbide, rock, metal, etc. The discs are perfect for making slots and slits and are coated on one side as well as around the edge. California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

100Pc Diamond Bur Bit Set Rotary Tools 1/8 Shank


100Pc Diamond Bur Bit Set Rotary Tools 1/8 Shank


$24.83


100 New Diamond Coated Burs. This is a new set of 100 diamond coated burs. This diamond bur set allows you to shape, grind and finish with precision. Great for filing glass, ceramics, tile, brick, plastics, wood, fiberglass, stone, rock carbide, gold, platinum, silver, metals or anything else that is hard. Recommended for jewelers, lapidary, hobbies and crafts, modeling, home repair, etc. Assortment includes various sizes of round, cone, inverted cone, tree, bud, cylinder and knife edge burs. Provides uniform cutting on wide a variety of materials. Use water for lubricant. All have a 1/8 (2.5 mm) shank. FindingKing works hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.

11.75 x 11.75 Stone Mosaic Tile in Brown


11.75 x 11.75 Stone Mosaic Tile in Brown


$30.58


LEG2068: Features: -Material: Stone, glass. -Color: Brown. Product Type: -Wall Tile. Finish: -Brown. Material: -Stone composite/Glass. Installation Type: -Thin set & grout. Dimensions: Overall Product Weight: -3.6 lbs. Overall Thickness: -0.25.

121Pc Diamond Burs Drill Bits Mandrel Tools fits Dremel


121Pc Diamond Burs Drill Bits Mandrel Tools fits Dremel


$76.99


121Pc Diamond Burs Drill Bits Mandrel Tools Fits Dremel. 50 Diamond Coated Burs & Wheels. This is a new set of 50 diamond coated burs and wheels. This master diamond bur set allows you to shape, grind and finish with precision. Great for filing glass, ceramics, tile, brick, plastics, wood, fiberglass, stone, rock carbide, gold, platinum, silver, metals or anything else that is hard. Recommended for jewelers, lapidary, hobbies and crafts, modeling, home repair, etc. Assortment includes various sizes of round, cone, inverted cone, tree, bud, cylinder and knife edge burs. Provides uniform cutting on wide a variety of materials. Use water for lubricant. All burs have a 1/8 (3 mm) shank. 156 Slot Bur Organizer. This is a new 156 slot bur organizer. Has 108 slots for tools with 3/32 (2.5 mm) shanks. Has 48 slots for tools with 1/8 (3 mm) shanks. Organize burs, mini brushes, drills, diamond points or anything else which fits into a handpiece. Rotates on steel ball bearings. It measures approximately 3 3/4 tall with a base that measures about 6 (152.5 mm) in diameter. Tools not included. 10 Diamond Coated Twist Drill Bits. This is a new set of 10 high speed diamond coated twist drill bits. Great for drilling stone, ceramic, glass and other hard non-metallic materials. These have 1/8 (3 mm) shanks. These bits measure approximately 1/8 (3 mm). 30 Diamond Coated Burs. This is a new set of 30 diamond coated burs. These are 40 grit. This master diamond bur set allows you to shape, grind and finish with precision. Great for filing glass, ceramics, tile, brick, plastics, wood, fiberglass, stone, rock carbide, gold, platinum, silver, metals or anything else that is hard. Recommended for jewelers, lapidary, hobbies and crafts, modeling, home repair, etc. Assortment includes various sizes of round, cone, inverted cone, tree, bud, cylinder and knife edge burs. Provides uniform cutting on wide a variety of materials. Use water for lubricant. All have a 1/8 (3 mm) shank. 20 Diam

14.5cm Long Silver Tone Metal Ceramic Tile Pointed Cutter Scriber Hardware


14.5cm Long Silver Tone Metal Ceramic Tile Pointed Cutter Scriber Hardware


$5.93


Silver tone metal fine point ceramic tile cutter for fast cutting speed and extra cutting life. Suitable for cutting all kinds of normal glass, tiles, porcelains and ceramics of normal hardness. Fine point cutter will increase sharpness of this bit into those glass and tile materials in dry cutting and wet cutting. California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

15pcs Home Window Glass Wall Suction Cup Hanger Clip for Brush Razor


15pcs Home Window Glass Wall Suction Cup Hanger Clip for Brush Razor


$7.39


Installation sites: Smooth surface (tile, glass, graite, stainless steel, styrofoam plates and so on. No nails, No holes at wall. Applied in kitchen, washroom, bedroom, wardrobe and so on. Usage: Clean the surface of the wall with a dry cloth, then put the suction cup hardly until it sucks the surface. Loaded booster board, tightened up plastic triangle, put a small iron. California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

2 Cutting Diameter Hole Saw Cutter for Glass Tile


2 Cutting Diameter Hole Saw Cutter for Glass Tile


$9.59


Suitable for drilling marble, tile, glass, granite, stone, ideal replacement for the old or damaged ones. Attention: The Hinge Boring Bit is used on bench drill or drill machine. Hand drill or electric drill is not recommended.

2 Diamond Coated Cutting Wheels Lapidary Rotary Tool 1


2 Diamond Coated Cutting Wheels Lapidary Rotary Tool 1


$12.5


2 New Diamond Coated Cutting Wheels. These are a new set of 2 diamond coated cutting wheels. They are great for filing glass, ceramics, tile, brick, plastics, wood, fiberglass, stone, rock carbide, gold, platinum, silver, metals or anything else that is hard. Longevity is assured as the diamond particles are electroplated onto the surface of the metal. Recommended for jewelers, lapidary, hobbies, crafts, modeling, home repair, etc. Can be used with a rotary tool. Each wheel measures approximately 1 x 1/4 (25.4 x 6 mm) thick with a 1/8 (3 mm) shank. FindingKing works hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.

2 Diamond Coated Wheels Jewelers Lapidary Tool 5/8


2 Diamond Coated Wheels Jewelers Lapidary Tool 5/8


$8.5


2 New Diamond Coated Grinding Wheel. These are a new set of diamond coated grinding wheel. They are great for filing glass, ceramics, tile, brick, plastics, wood, fiberglass, stone, rock carbide, gold, platinum, silver, metals or anything else that is hard. Recommended for jewelers, lapidary, hobbies, crafts, modeling, home repair, etc. Longevity is assured as the diamond particles are electroplated onto the surface of the metal. Can be used with a rotary tool. These have a slotted screw to easily replace the wheel. Each wheel measures approximately 5/8 x 1/8 (15 x 3 mm) thick with a 1/8 (3 mm) shank. FindingKing works hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.

2 Diamond Coated Wheels Jewelers Lapidary Tool 7/8


2 Diamond Coated Wheels Jewelers Lapidary Tool 7/8


$10.5


2 New Diamond Coated Grinding Wheel. These are a new set of diamond coated grinding wheels. They are great for filing glass, ceramics, tile, brick, plastics, wood, fiberglass, stone, rock carbide, gold, platinum, silver, metals or anything else that is hard. Recommended for jewelers, lapidary, hobbies, crafts, modeling, home repair, etc. Longevity is assured as the diamond particles are electroplated onto the surface of the metal. Can be used with a rotary tool. These have a slotted screw to easily replace the wheel. Each wheel measures approximately 7/8 x 1/8 (22 x 3 mm) thick with a 1/8 (3 mm) shank. FindingKing works hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.

2 Diamond Hole Saws Metal Lapidary Rock Cutting Tool


2 Diamond Hole Saws Metal Lapidary Rock Cutting Tool


$11.85


2 New Diamond Coated Hole Saws. This is a new set of 2 diamond coated hole saws. These are great for filing glass, ceramics, tile, brick, plastics, wood, fiberglass, stone, rock carbide, gold, platinum, silver, metals or anything else that is hard. Longevity is assured as the diamond particles are electroplated onto the surface of the metal. Recommended for jewelers, lapidary, hobbies, crafts, modeling, home repair, etc. Each hole saw measures approximately 7/16 (11 mm) in diameter with a 1/4 (6.5 mm) shank.

2 Diamond Wheels Lapidary Rock Grinding 1/4 fit Dremel


2 Diamond Wheels Lapidary Rock Grinding 1/4 fit Dremel


$17.5


2 New Diamond Coated Grinding Wheels. This is a new set of 2 diamond coated 80 grit grinding wheels. These are great for filing glass, ceramics, tile, brick, plastics, wood, fiberglass, stone, rock carbide, gold, platinum, silver, metals or anything else that is hard. Longevity is assured as the diamond particles are electroplated onto the surface of the metal. Recommended for jewelers, lapidary, hobbies, crafts, modeling, home repair, etc. They can be used with a Dremel tool. Each wheel measures approximately 1/4 (6.5 mm) thick with a 1/8 (3 mm) shank.

2 x Silver Tone Hand Tool 16mm Cutting Dia Glass Hole Saw


2 x Silver Tone Hand Tool 16mm Cutting Dia Glass Hole Saw


$8.8


Designed with diamond coated tip and sturdy metal body, gives good performance and longer life. Excellent for making clean and accurate holes on glass and tile. Works better with an electric drill (here is not included).

Leave a comment

Your comment