Hole Punch



Hole Punch
What are the individual disks from a hole punch called?

What are the individual disks from a hole punch called?

In the U.S. it is called a “chad.”

Metal Hole Punch



0.16 Punching Hole Straight Shank Hollow Paper Drill Bit Tool 2.8 Length


0.16 Punching Hole Straight Shank Hollow Paper Drill Bit Tool 2.8 Length


$9.11


1.Feature with taper shank, 4mm punch hole, sharp cutting edge wax coated until use.2.Suit a large range paper drill bit machines.

1 TON HAND PUNCH


1 TON HAND PUNCH


$33.99


Ideal for Auto Body Repairs. Punches 7 Sizes of Precision Round Holes in Aluminum, Plastic, Brass, Even 16-Ga. 1-1/2″ Throat. Includes Die Adjusting Key and Blow Mold Case. Included Dies: 3/32″(2mm), 1/8″(3mm), 5/32″(4mm), 3/16″(4.5mm), 7/32″(5.5mm), 1/

1-3/4L - Retrieving Magnet, Westward, 3DYF5


1-3/4L – Retrieving Magnet, Westward, 3DYF5


$8.17


California Proposition 65: This product contains a chemical known to the State of California to cause cancer. California Proposition 65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Retrieving Magnet, Length 1 3/4 In, Width 5/8 In, Surface Size 1 3/4 x 5/8 In, Pickup Length 1 3/4 In, Pull Capacity 18 Lb, Ceramic Magnets Glued in Welded Steel Housing Construction, Use Latch Magnet To Lift, Hold, And Retrieve Metal Objects. Features Center Hole Allowing Magnet To Be Mounted To Workbench Or Attach To Rod For Retrieving

1/2 Jobber Length Drill Bit


1/2 Jobber Length Drill Bit


$10.63


Features and Benefits: No center punch or pilot hole required Rounder, more accurate holes Faster penetration Drills tough alloys Reduces user fatigue Premium grade KnKut Drill Bits are manufactured from a high grade M-7 Molybdenum high speed steel, that has a high vanadium content. KnKut Performance Drill Bits are salt nitride treated, actually penetrating the tool’s surface giving KnKut Drill Bits the hardness to drill tough materials such as stainless steel and titanium alloy.

1/4 - 1-3/8 TITANIUM STEP BIT


1/4 – 1-3/8 TITANIUM STEP BIT


$17.99


Manufactured With Heat Treated HSS Coated With Titanium Nitride. Drills Sizes: 1/4″ to 1-3/8″ in 1/8″ Increments. Two Flute Design For Faster, Smoother Cutting. Ten Sizes With Just One Bit. For Drilling Holes in Thin Material Such as Steel, Stainless Steel, Copper, Alum. Self-Starting, No Walking and Center Punch is Not Required

1/4 - 3/4 TITANIUM STEP BIT


1/4 – 3/4 TITANIUM STEP BIT


$27.99


Manufactured With Heat Treated HSS Coated With Titanium Nitride. Drills Sizes: 1/4″ to 3/4″ in 1/16″ Increments. Two Flute Design For Faster, Smoother Cutting. Nine Sizes With Just One Bit. For Drilling Holes in Thin Material Such as Steel, Stainless Steel, Copper, Alum. Self-Starting, No Walking and Center Punch is Not Required

1/4 x 9.8mm x 15mm Straight Knurled Umbrella Head Round Rivet Nuts 500 Pcs


1/4 x 9.8mm x 15mm Straight Knurled Umbrella Head Round Rivet Nuts 500 Pcs


$51.66


This Nutsert has a large flange to provide increased strength in punched and drilled holes. Knurled body provides a higher resistance to spin out when installed in soft materials. Rivet Nut?fastener is a tubular rivet with internal threads. It can be installed in seconds form one side of the work. For CALIFORNIA residents only: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains’ products, the exposure to these chemicals may be of no significant risk to you, but out of caution, we have elected to place this warning on our site to make sure our customers are informed. You can find more infomation at http://www. oehha. ca.gov/proposition-65/about-proposition-65.

1/8 - 1/2 TITANIUM STEP BIT


1/8 – 1/2 TITANIUM STEP BIT


$17.99


Manufactured With Heat Treated HSS Coated With Titanium Nitride. Drills Sizes: 1/8″ to 1/2″ in 1/32″ Increments. Two Flute Design For Faster, Smoother Cutting. Thirteen Sizes With Just One Bit. For Drilling Holes in Thin Material Such as Steel, Stainless Steel, Copper, Alum. Self-Starting, No Walking and Center Punch is Not Required

1/8 - 7/8 TITANIUM STEP BIT


1/8 – 7/8 TITANIUM STEP BIT


$27.99


Manufactured With Heat Treated HSS Coated With Titanium Nitride. Drills Sizes: 1/8″ to 7/8″ in 1/16″ Increments. Two Flute Design For Faster, Smoother Cutting. Ten Sizes With Just One Bit. For Drilling Holes in Thin Material Such as Steel, Stainless Steel, Copper, Alum. Self-Starting, No Walking and Center Punch is Not Required

10 Pcs 22mm x 9mm x 7mm Coil Stamping Compression Printer Die Spring


10 Pcs 22mm x 9mm x 7mm Coil Stamping Compression Printer Die Spring


$4.31


Made of good quality metal in silver tone, features high elasticity and good precision, installed small size and generate strong force. This Printer Die Spring is widely used in the punching moulds, metal die-casting moulds, plastic injection moulds and mechanical equipment with rigid structure. FAQ: What is Hole Dia? What is Rod Dia?Hole Dia: The Diameter of the Hole on the Mold, i.e.the Outer Diameter of the springRod Dia: The Diameter of the Rod that is to be inserted into this spring, i.e.the inner Diameter of the spring For CALIFORNIA residents only: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains’ products, the exposure to these chemicals may be of no significant risk to you, but out of caution, we have elected to place this warning on our site to make sure our customers are informed. You can find more infomation at http://www. oehha. ca.gov/proposition-65/about-proposition-65.

10 Pcs M10x80mm Stainless Steel Hex Nut Sleeve Expansion Anchor Bolts Screws


10 Pcs M10x80mm Stainless Steel Hex Nut Sleeve Expansion Anchor Bolts Screws


$31.55


M10x80mm Expansion anchor bolt with flat washer and hex nut. Applications: be widely used in fence, burglarproof doors and windows, canopy, air conditioning rack fixation, home decoration, engineering, etc. The working principle of expansion screw: ?Put the expansion screw into the ground or the hole on the wall and then tighten the nuts of the expansion bolt with wrench. The bolt goes outside while the metal sheath does not move. Thus the bigger head of the bolt will expand the metal sheath, making it fill the whole hole. Now, the expansion screw can not be pulled out. Installation methods: ?Select a chopping bit with the same diameter as expansion screw casing, and install it on the electric drill for punching. The depth of the hole should be equal to the length of the bolt. Then insert the expansion bolt set into the hole. Remember: Do not screw off the nut and prevent the bolt from falling into the hole when the drill is too deep. Tighten the nut for 2 to 3 buckles and unscrew? the nut when expansion bolt si very tight without any looseness. Then the fixed items are mounted with perforated fixed part and installed aiming at bolt. The gasket?or spring washer outside is used to screw the nut tightly. For CALIFORNIA residents only: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains’ products, the exposure to these chemicals may be of no significant risk to you, but out of caution, we have elected to place this warning on our site to make sure our customers are informed. You can find more information at http://www. oehha. ca.gov/proposition-65/about-proposition-6990.

10 Pcs M10x80mm Stainless Steel Hex Nut Sleeve Expansion Anchor Bolts Screws


10 Pcs M10x80mm Stainless Steel Hex Nut Sleeve Expansion Anchor Bolts Screws


$24.61


M10x80mm Expansion anchor bolt with flat washer and hex nut. Applications: be widely used in fence, burglarproof doors and windows, canopy, air conditioning rack fixation, home decoration, engineering, etc. The working principle of expansion screw: ?Put the expansion screw into the ground or the hole on the wall and then tighten the nuts of the expansion bolt with wrench. The bolt goes outside while the metal sheath does not move. Thus the bigger head of the bolt will expand the metal sheath, making it fill the whole hole. Now, the expansion screw can not be pulled out. Installation methods: ?Select a chopping bit with the same diameter as expansion screw casing, and install it on the electric drill for punching. The depth of the hole should be equal to the length of the bolt. Then insert the expansion bolt set into the hole. Remember: Do not screw off the nut and prevent the bolt from falling into the hole when the drill is too deep. Tighten the nut for 2 to 3 buckles and unscrew? the nut when expansion bolt si very tight without any looseness. Then the fixed items are mounted with perforated fixed part and installed aiming at bolt. The gasket?or spring washer outside is used to screw the nut tightly. For CALIFORNIA residents only: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains’ products, the exposure to these chemicals may be of no significant risk to you, but out of caution, we have elected to place this warning on our site to make sure our customers are informed. You can find more infomation at http://www. oehha. ca.gov/proposition-65/about-proposition-65.

100 Chrome Bottle Caps New Silver Bottlecaps Cap Colored


100 Chrome Bottle Caps New Silver Bottlecaps Cap Colored


$10.99


A blank slate for your crafting projects! Standard size crown bottle caps with a shiny finish. Inside is standard silver grey. Make pendants, earrings, magnets, bracelets, use in scrap-booking, use grommets to attach to belts, the options are endless! These are new and un-used with no liner. Use 2-part epoxy or a resin product such as Lisa Pavelka Magic-Glos UV Resin to embed a photo, design, even a small charm or other object into a clear, dimensional glossy finish. Glue on pendant bails using E-6000 adhesive for an easy way to hang these from a chain without having to drill or punch a hole. 32mm in diameter (1 1/4 Inch). Interior diameter 26mm (1 Inch). Height is 5.5mm (.22 Inch) Quantity: 100 Bottle Caps

100 Pcs 13/64 x 1 3/16 Nickel Plated Oval Head Semi-Tubular Rivets Silver Tone


100 Pcs 13/64 x 1 3/16 Nickel Plated Oval Head Semi-Tubular Rivets Silver Tone


$18.08


Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength. Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched. Tubular-hole rivets often used as pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole. Specifications: Product Name: Semi-Tubular Rivet Material: Iron(Nickel Plated) Shank Diameter(D): 5mm(13/64 inch) Length(L): 30mm(1 3/16 inch) Hole Diameter(B): 3.8mm(5/32 inch) Hole Depth(C): 5mm(13/64 inch) Head Diameter(A): 9.5mm(3/8 inch) Head Thickness(H): 2mm(5/64 inch) Color: Silver Tone Net Weight: 480g? Package Content: 100pcs(+/-2%) x Semi-Tubular Rivet For CALIFORNIA residents only: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains’ products, the exposure to these chemicals may be of no significant risk to you, but out of caution, we have elected to place this warning on our site to make sure our customers are informed. You can find more infomation at http://www. oehha. ca.gov/proposition-65/about-proposition-65.

100 Pcs 13/64 x 1 7/64 Nickel Plated Oval Head Semi-Tubular Rivets Silver Tone


100 Pcs 13/64 x 1 7/64 Nickel Plated Oval Head Semi-Tubular Rivets Silver Tone


$18.21


Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength. Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched. Tubular-hole rivets often used as pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole. Specifications: Product Name: Semi-Tubular Rivet Material: Iron(Nickel Plated) Shank Diameter(D): 5mm(13/64 inch) Length(L): 28mm(1 7/64 inch) Hole Diameter(B): 3.8mm(5/32 inch) Hole Depth(C): 5mm(13/64 inch) Head Diameter(A): 9.5mm(3/8 inch) Head Thickness(H): 2mm(5/64 inch) Color: Silver Tone Net Weight: 463g? Package Content: 100pcs(+/-2%) x Semi-Tubular Rivet For CALIFORNIA residents only: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains’ products, the exposure to these chemicals may be of no significant risk to you, but out of caution, we have elected to place this warning on our site to make sure our customers are informed. You can find more infomation at http://www. oehha. ca.gov/proposition-65/about-proposition-65.

100 Pcs 13/64 x 1 7/64 Nickel Plated Oval Head Semi-Tubular Rivets Silver Tone


100 Pcs 13/64 x 1 7/64 Nickel Plated Oval Head Semi-Tubular Rivets Silver Tone


$24.49


Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength. Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched. Tubular-hole rivets often used as pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole. Specifications: Product Name: Semi-Tubular Rivet Material: Iron(Nickel Plated) Shank Diameter(D): 5mm(13/64 inch) Length(L): 28mm(1 7/64 inch) Hole Diameter(B): 3.8mm(5/32 inch) Hole Depth(C): 5mm(13/64 inch) Head Diameter(A): 9.5mm(3/8 inch) Head Thickness(H): 2mm(5/64 inch) Color: Silver Tone Net Weight: 463g? Package Content: 100pcs(+/-2%) x Semi-Tubular Rivet For CALIFORNIA residents only: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains’ products, the exposure to these chemicals may be of no significant risk to you, but out of caution, we have elected to place this warning on our site to make sure our customers are informed. You can find more information at http://www. oehha. ca.gov/proposition-65/about-proposition-7456.

100 Pcs 15/64 D Shank 1 L Nickel Plated Oval Head Semi Tubular Rivets


100 Pcs 15/64 D Shank 1 L Nickel Plated Oval Head Semi Tubular Rivets


$18.26


Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength. Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched. Tubular-hole rivets often used as pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole. Specifications: Product Name: Semi-Tubular Rivet Material: Iron(Nickel Plated) Shank Diameter(D): 6mm(15/64 inch) Length(L): 25mm(1 inch) Hole Diameter(B): 4.32mm(11/64 inch) Hole Depth(C): 5mm(13/64 inch) Head Diameter(A): 10mm(25/64 inch) Head Thickness(H): 2mm(5/64 inch) Color: Silver Tone Net Weight: 579g? Package Content: 100pcs(+/-2%) x Semi-Tubular Rivet For CALIFORNIA residents only: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains’ products, the exposure to these chemicals may be of no significant risk to you, but out of caution, we have elected to place this warning on our site to make sure our customers are informed. You can find more infomation at http://www. oehha. ca.gov/proposition-65/about-proposition-65.

100 Pcs 15/64 D Shank 1 L Nickel Plated Oval Head Semi Tubular Rivets


100 Pcs 15/64 D Shank 1 L Nickel Plated Oval Head Semi Tubular Rivets


$24.49


Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength. Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched. Tubular-hole rivets often used as pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole. Specifications: Product Name: Semi-Tubular Rivet Material: Iron(Nickel Plated) Shank Diameter(D): 6mm(15/64 inch) Length(L): 25mm(1 inch) Hole Diameter(B): 4.32mm(11/64 inch) Hole Depth(C): 5mm(13/64 inch) Head Diameter(A): 10mm(25/64 inch) Head Thickness(H): 2mm(5/64 inch) Color: Silver Tone Net Weight: 579g? Package Content: 100pcs(+/-2%) x Semi-Tubular Rivet For CALIFORNIA residents only: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains’ products, the exposure to these chemicals may be of no significant risk to you, but out of caution, we have elected to place this warning on our site to make sure our customers are informed. You can find more information at http://www. oehha. ca.gov/proposition-65/about-proposition-7463.

100 Pcs 15/64 D Shank 25/32 L Nickel Plated Oval Head Semi Tubular Rivets


100 Pcs 15/64 D Shank 25/32 L Nickel Plated Oval Head Semi Tubular Rivets


$16.67


Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength. Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched. Tubular-hole rivets often used as pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole. Specifications: Product Name: Semi-Tubular Rivet Material: Iron(Nickel Plated) Shank Diameter(D): 6mm(15/64 inch) Length(L): 20mm(25/32 inch) Hole Diameter(B): 4.32mm(11/64 inch) Hole Depth(C): 5mm(13/64 inch) Head Diameter(A): 10mm(25/64 inch) Head Thickness(H): 2mm(5/64 inch) Color: Silver Tone Net Weight: 452g? Package Content: 100pcs(+/-2%) x Semi-Tubular Rivet For CALIFORNIA residents only: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains’ products, the exposure to these chemicals may be of no significant risk to you, but out of caution, we have elected to place this warning on our site to make sure our customers are informed. You can find more infomation at http://www. oehha. ca.gov/proposition-65/about-proposition-65.

100 Pcs 15/64 D Shank 25/32 L Nickel Plated Oval Head Semi Tubular Rivets


100 Pcs 15/64 D Shank 25/32 L Nickel Plated Oval Head Semi Tubular Rivets


$23.9


Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength. Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched. Tubular-hole rivets often used as pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole. Specifications: Product Name: Semi-Tubular Rivet Material: Iron(Nickel Plated) Shank Diameter(D): 6mm(15/64 inch) Length(L): 20mm(25/32 inch) Hole Diameter(B): 4.32mm(11/64 inch) Hole Depth(C): 5mm(13/64 inch) Head Diameter(A): 10mm(25/64 inch) Head Thickness(H): 2mm(5/64 inch) Color: Silver Tone Net Weight: 452g? Package Content: 100pcs(+/-2%) x Semi-Tubular Rivet For CALIFORNIA residents only: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains’ products, the exposure to these chemicals may be of no significant risk to you, but out of caution, we have elected to place this warning on our site to make sure our customers are informed. You can find more information at http://www. oehha. ca.gov/proposition-65/about-proposition-7468.

Leave a comment

Your comment