Iron Heat



Iron Heat
When you curl your hair using a curling iron, do you set it to the highest heat setting?

I use a heat protectant and I’m always paranoid of putting my iron to the highest heat setting and leaving it on too much.

So I usually stay around 19 – 16
and I don’t really leave my hair in for that long.

Any tips?

It really depends on how high the curling iron goes. Some hair styling products can heat up to almost 500 degrees, which is too darn hot for anyone’s hair! Some will only heat up to 260 degrees. Read the material that came with the iron to see how hot it gets (degree wise). Never use anything over 400 degrees because you’ll be burning your hair.

What you should do is start at the lowest setting and work your way up. This is how you find the temperature that will work for your hair without burning it. You should always use a good heat protector, but they do not completely stop curling irons, blow dryers, or flat irons from burning your hair. It cuts down on the damage done, but it doesn’t completely stop it. Using it on a setting that’s too hot for your hair will burn it, whether you use a good heat protector or not.

I’ve had heat damage from a curling iron before, and it happened because I used it everyday, so it can happen. My hair broke off like crazy, too, and was severely damaged because of it. In fact, the damage was so bad that my hair dresser Refused to use heat on my hair, because it was so damaged.

RadioShack butane iron: heat for heavy work



Norwich Desktop Appliance Hair Dryer Iron Holder


Norwich Desktop Appliance Hair Dryer Iron Holder


$18.99


All your wavers, your curling irons, flat irons, hair dryers, brush irons, and other hot styling metals of every shape and size can be a little overwhelming to keep track of, especially when you’re in the middle of a job. The “Norwich” keeps everything together and easy to get to with two wide holders for flat irons and wavers, a large holder for you hair dryer in the center and three small holders along the side. The unit has a strong hammered metal frame with heat resistant holders so your tools of the trade stay safe and organized.

Preston Salon Wall Mount Appliance Dryer Iron Holder


Preston Salon Wall Mount Appliance Dryer Iron Holder


$24.99


This attractive black wall mount appliance holder is made of the highest quality metal with a very contemporary hammered tone finish. The inserts are heat resistant. All appliance holder cavities (center circle holder has no bottom) taper in toward the bottom.

(Set) Cold Heat Soldering Pen Heats Up To 700 Degrees F & 4 AA Batteries


(Set) Cold Heat Soldering Pen Heats Up To 700 Degrees F & 4 AA Batteries


$22.96


(Set) Cold Heat Soldering Pen Heats Up To 700 Degrees F & 4 AA Batteries. Tip heats up from 70° to 700°F in less than one second & cools down to “touch-safe” in no time. Built-in LED project light & automatic shut-off. Completely cordless-goes anywhere. Solder over 600 joints per battery pack. 20 times more efficient than typical soldering tools. Patented ceramic tip creates lots of heat even when very little electricity passes through it. The unique design generates instantaneous heat at the point of contact, making a quick job of any soldering project. Perfect for electronics, jewelry, crafts, and hobbies. Comes in a durable, convenient carry case. Approx. 7.5″ x 2″ x 1″. Uses 4 AA batteries.

(Set) Cold Heat Soldering Pen Heats Up To 700 Degrees F with Replacement Tip


(Set) Cold Heat Soldering Pen Heats Up To 700 Degrees F with Replacement Tip


$33.95


(Set) Cold Heat Soldering Pen Heats Up To 700 Degrees F with Replacement Tip Tip heats up from 70° to 700°F in less than one second & cools down to “touch-safe” in no time. Built-in LED project light & automatic shut-off. Completely cordless-goes anywhere. Solder over 600 joints per battery pack. 20 times more efficient than typical soldering tools. Patented ceramic tip creates lots of heat even when very little electricity passes through it. The unique design generates instantaneous heat at the point of contact, making a quick job of any soldering project. Perfect for electronics, jewelry, crafts, and hobbies. Comes in a durable, convenient carry case. Approx. 7.5″ x 2″ x 1″. Uses 4 AA batteries, not included.

(Set/2) Heated Hair Straightening Brushes With LCD & Push Button Controls


(Set/2) Heated Hair Straightening Brushes With LCD & Push Button Controls


$12.97


(Set/2) Hair Straightening Brushes Easily straighten your hair just by brushing-without using a flat iron or hair dryer! Heated hairbrushes feature special ceramic coating to deliver quick straightening results, along with digital LCD temperature screen, push-button controls for power & temperature, and 360° rotating plug for easy handling. 10.5″ long.

0.8mm Dia 20 AWG 25m Roll 0.814 Ohms/ft Heating Heater Wire


0.8mm Dia 20 AWG 25m Roll 0.814 Ohms/ft Heating Heater Wire


$7.48


Iron-chromium-aluminium (FeCrAl) is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, (Nicotine Free), lab inoculating loops, release mechanisms, ceramic support in kilns. We have all kinds of Wire Gauge/Length/Resistance of Nichrome Wire, Alchrome Wire, please kindly have a check in our store or contact our customer service for more details.

0.9mm Dia 19 Gauge AWG 70m Roll Heating Heater Wire


0.9mm Dia 19 Gauge AWG 70m Roll Heating Heater Wire


$20.35


Iron-chromium-aluminium (FeCrAl) is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, (Nicotine Free), lab inoculating loops, release mechanisms, ceramic support in kilns. We have all kinds of Wire Gauge/Length/Resistance of Nichrome 80 Wire, Constantan Wire, please kindly have a check in our store or contact our customer service for more details.16 Gauge A1 AWG: 1.29 mm – 0.324 Ohms/ft Resistance – Heat Resistant to 1500 C18 Gauge A1 AWG: 1.02 mm – 0.515 Ohms/ft Resistance – Heat Resistant to 1500 C20 Gauge A1 AWG: 0.81 mm – 0.814 Ohms/ft Resistance – Heat Resistant to 1500 C21 Gauge A1 AWG: 0.72 mm – 1.06 Ohms/ft Resistance – Heat Resistant to 1500 C22 Gauge A1 AWG: 0.64mm – 1.31 Ohms/ft Resistance – Heat Resistant to 1500 C23 Gauge A1 AWG: 0.57mm – 1.69 Ohms/ft Resistance – Heat Resistant to 1500 C24 Gauge A1 AWG: 0.51mm – 2.04 Ohms/ft Resistance – Heat Resistant to 1500 C25 Gauge A1 AWG: 0.45mm – 2.72 Ohms/ft Resistance – Heat Resistant to 1500 C26 Gauge A1 AWG: 0.40mm – 3.21 Ohms/ft Resistance – Heat Resistant to 1500 C27 Gauge A1 AWG: 0.36mm – 4.26 Ohms/ft Resistance – Heat Resistant to 1500 C28 Gauge A1 AWG: 0.32mm – 5.27 Ohms/ft Resistance – Heat Resistant to 1500 C29 Gauge A1 AWG: 0.28mm – 6.90 Ohms/ft Resistance – Heat Resistant to 1500 C30 Gauge A1 AWG: 0.254mm – 8.36 Ohms/ft Resistance – Heat Resistant to 1500 C31 Gauge A1 AWG: 0.22mm – 11.28 Ohms/ft Resistance – Heat Resistant to 1500 C32 Gauge A1 AWG: 0.20mm – 13.75 Ohms/ft Resistance – Heat Resistant to 1500 C34 Gauge A1 AWG: 0.16mm – 21.1 Ohms/ft Resistance – Heat Resistant to 1500 C

1 inch 220 TACO THREADED FLO-CHECK IPS THREADED HOT WATER HEATING SYSTEM CHECK VALVE


1 inch 220 TACO THREADED FLO-CHECK IPS THREADED HOT WATER HEATING SYSTEM CHECK VALVE


$35.71


Taco Flo-Checks have dependably stopped gravity circulation in forced hot water heating systems for over 40 years. Flo-Cheks open automatically when the circulator starts running. They feature a thumb screw to manually open the valve, and are available in a cast iron universal body and a bronze sweat in-line configuration. Note image shown is for the 1-1/4″ size.

1 Stainless Steel Spoon Rest Heat Resistant Kitchen Utensil Spatula Holder Decor


1 Stainless Steel Spoon Rest Heat Resistant Kitchen Utensil Spatula Holder Decor


$10.99


Stainless Steel Spoon Rest Kitchen Utensil Holder Heat Resistant Spatula Decor! Flexible and comfort material Ideal for removing a casserole from the oven or grabbing a hot cast iron skillet on the stove top Make fabulous trivets Skid and slip resistant Dot texture makes opening jar a snap Cutout hole for easy hanging Protects against hight temperatures Heavy duty Measures 9.5″ Long, spoon wide: 3.5″ approx and is dishwasher-safe

1.4mm 15Gauge AWG 131.23ft Roll Cable Heating Heater Wire


1.4mm 15Gauge AWG 131.23ft Roll Cable Heating Heater Wire


$27.59


Iron-chromium-aluminium (FeCrAl) is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns. We have all kinds of Wire Gauge/Length/Resistance of Nichrome Wire, Alchrome Wire, please kindly have a check in our store or contact our customer service for more details.

1.4mm Dia 15 AWG 5M Roll Cable Heating Heater Wire


1.4mm Dia 15 AWG 5M Roll Cable Heating Heater Wire


$5.92


Iron-chromium-aluminium (FeCrAl) is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, (Nicotine Free), lab inoculating loops, release mechanisms, ceramic support in kilns. We have all kinds of Wire Gauge/Length/Resistance of Nichrome 80 Wire, Constantan Wire, please kindly have a check in our store or contact our customer service for more details.

1.5Meter 2mm Width Copper Braid Solder Wire Wick for Desoldering


1.5Meter 2mm Width Copper Braid Solder Wire Wick for Desoldering


$8.37


Specifications: Product NameDesoldering WireLength1.5M / 59″(5ft)Width2mm / 0.078″Reel Diameter5.5cm / 2.2″MaterialCopper (Wire)Plastic (Reel)Main ColorCopper Red (Wire)Weight8gPackage Content1 x Desoldering WireDescriptions: Generally used as a solder removing device in soldering and desoldering work. Made of copper materials. For Soldering Iron use, solder parts like boards, cells, electronics devices, radios, inverters, semiconductors, transistors etc. To use it, you can put the wire over the joint and heat it and then manipulate the mesh to pick up the solder. Please always work in a well ventilated area when desoldering to avoid the fumes from heat solder and the coating doing harm to your eyes and lungs.

1.8mm Dia 13Gauge AWG 32.8ft Roll Heating Heater Wire


1.8mm Dia 13Gauge AWG 32.8ft Roll Heating Heater Wire


$14.87


Iron-chromium-aluminium (FeCrAl) is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns. We have all kinds of Wire Gauge/Length/Resistance of Nichrome Wire, Alchrome Wire, please kindly have a check in our store or contact our customer service for more details.

1.8T TURBO MANIFOLD Includes heat-shield for protection of hoses, wiring, and


1.8T TURBO MANIFOLD Includes heat-shield for protection of hoses, wiring, and


$322.12


Includes heat-shield for protection of hoses, wiring, and other engine components Cast iron or stainless tubular construction protects against warping and/or cracking Leak resistant for long-lasting performance A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards OE#: 06A-253-033-AL

1/16-inch Cobalt M2 HSS 135 Degree Split Point Jobber Drill Bits 12pcs


1/16-inch Cobalt M2 HSS 135 Degree Split Point Jobber Drill Bits 12pcs


$9.39


1.M2 HSS?Cobalt Steel?helps discipate heat, which is the killer of all drill bits, providing it with longer life and more durability.2.Suitable for processing non-ferrous metals (such as copper and aluminum), non metallic and ferrous metals (such as iron, steel and stainless steel).3.Self-centering 135 Degree split point starts on contact with no walking or skating and is designed for use in heavy-duty drilling applications.4.The cobalt construction allows this bit to cut through abrasive materials, like stainless steel and cast iron which are extremely tough on traditional high speed steel drill bits.5.The straight shank works in both keyed and key-less chucks. Specifications: Product Name: Jobber Drill BitMaterial: M2 HSS, CobaltPoint Angle: 135 DegreeShank Diameter:?1/16-inchBit Diameter: 1/16-inchFlute Length:?22mm / 0.87-inchTotal Length:?50mm / 2-inchFearure: Straight ShankColor: Champagne ColorWeight: 12gPackage Content: 12pcs x Jobber Drill Bit

1/2-inch Dia M2 HSS 135 Degree Split Point Cobalt Twist Drill Bits 2pcs


1/2-inch Dia M2 HSS 135 Degree Split Point Cobalt Twist Drill Bits 2pcs


$24.81


1.M2 HSS?Cobalt Steel?helps discipate heat, which is the killer of all drill bits, providing it with longer life and more durability.2.Suitable for processing non-ferrous metals (such as copper and aluminum), non metallic and ferrous metals (such as iron, steel and stainless steel).3.Self-centering 135 Degree split point starts on contact with no walking or skating and is designed for use in heavy-duty drilling applications.4.The cobalt construction allows this bit to cut through abrasive materials, like stainless steel and cast iron which are extremely tough on traditional high speed steel drill bits.5.The straight shank works in both keyed and key-less chucks. Specifications: Product Name: Cobalt?Drill BitMaterial: M2 HSS, CobaltPoint Angle: 135 DegreeShank Diameter:?1/2-inchBit Diameter: 1/2-inchFlute Length:?102mm / 4-inchTotal Length: 154mm / 6-inchFearure: Straight ShankColor: Champagne ColorWeight: 212gPackage Content: 2pcs x Cobalt?Drill Bit

1/2swtx3/8fip Drop Elbow 10156864


1/2swtx3/8fip Drop Elbow 10156864


$11.12


90 Degrees Drop Ear Elbow – Copper x FIP (female iron pipe). Cast bronze solder. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces. – Size: 1/2″ C x 3/8″ FIP, Angle: 90 deg, Type: Plumbing & Heating Systems, Material: Copper, Pkg Qty: 1, Package Type: Bag

1/4 Cobalt Sp Jobber Drill Bit S-B Power Tool Company Jobber Drill Bits CO2143


1/4 Cobalt Sp Jobber Drill Bit S-B Power Tool Company Jobber Drill Bits CO2143


$4.69


BOSCH DRILL BITS Bosch cobalt drill bits offer the best heat resistance and rigid thick web design for drilling in extremely ard and abrasive materials such as treated stainless steel (precipitation-hardened), cast iron and titanium.135 split point starts on contact with no walking or skating and no center punch is required A tough cobalt alloy delivers heat resistance up to 1100 Fahrenheit allowing the bit to perform for extended periods of time in the most abrasive materials without failing due to the high heat levels.

1/4-inch HSS M2 Cobalt Steel 135 Degree Split Point Jobber Drill Bit 12PCS


1/4-inch HSS M2 Cobalt Steel 135 Degree Split Point Jobber Drill Bit 12PCS


$27.19


1. HSS M2 Cobalt?steel helps discipate heat, which is the killer of all drill bits, providing it with longer life and more durability.2. Self-centering 135 Degree split point starts on contact with no walking or skating and is designed for use in heavy-duty drilling applications.3. The cobalt construction allows this bit to cut through abrasive materials, like stainless steel and cast iron which are extremely tough on traditional high speed steel drill bits.4.The straight shank works in both keyed and key-less chucks. Specifications: Product Name: Jobber Drill BitMaterial: HSS, M2, CobaltPoint Angle: 135 DegreeShank Diameter:?1/4-inchBit Diameter:?1/4-inchFlute Length:?62mm / 2.44-inchTotal Length:?104mm / 4.09-inchFearure: Straight ShankColor: Champagne ColorWeight: 219gPackage Content: 12 x Jobber Drill Bits

1/8-inch Cobalt M2 HSS 135 Degree Split Point Jobber Drill Bits 12pcs


1/8-inch Cobalt M2 HSS 135 Degree Split Point Jobber Drill Bits 12pcs


$11.56


1.M2 HSS?Cobalt Steel?helps discipate heat, which is the killer of all drill bits, providing it with longer life and more durability.2.Suitable for processing non-ferrous metals (such as copper and aluminum), non metallic and ferrous metals (such as iron, steel and stainless steel).3.Self-centering 135 Degree split point starts on contact with no walking or skating and is designed for use in heavy-duty drilling applications.4.The cobalt construction allows this bit to cut through abrasive materials, like stainless steel and cast iron which are extremely tough on traditional high speed steel drill bits.5.The straight shank works in both keyed and key-less chucks. Specifications: Product Name: Jobber Drill BitMaterial: M2 HSS, CobaltPoint Angle: 135 DegreeShank Diameter:?1/8-inchBit Diameter: 1/8-inchFlute Length:?36mm / 1.4-inchTotal Length: 72mm / 2.8-inchFearure: Straight ShankColor: Champagne ColorWeight: 43gPackage Content: 12pcs x Jobber Drill Bit

Leave a comment

Your comment