Tool Set



Tool Set

171 piece Channellock mechanics tool set. (toolbox part 3)



( PK)


( PK)


$2.25


P510, CHERRY TOOL PART, SET SCREW

(2) Dragway Tools B4000 4.0 Bare Cylinder Head for Ranger Explorer (Early Model)


(2) Dragway Tools B4000 4.0 Bare Cylinder Head for Ranger Explorer (Early Model)


$274.99


Dont buy a remanufactured cylinder head you will eventually have the same issues of the OEM head cracking. Dragway Tools brings you a brand new replacement cylinder head to relieve the worries of your engine failing. Set of (2) Early Model left and right 4.0 ClyindersReplaces casting T and UHigh grade cast iron for additional strengthNickle alloy material for longer durabilityBoth intake and exhaust have hardened valve seat insertsReinforced ribs for additional strengthFully machined gasket surfacesMeets or exceeds O.E. specificationsFits the following modelsNo Core Return Required Cracked Cylinder Head Overview: There have been three distinctly different heads with five different casting numbers installed on the 4.0L since 1990. The combustion chamber was changed in ’95 and the exhaust ports were revised in ’98. 1990-’94 All and 95-’96 AerostarThe original 90TM casting had an oval-shaped chamber that was slightly bigger in diameter on the intake side. It was replaced in ’93 by the 93TM-AA casting that was exactly the same. These heads can be identified by the letter “T” located on the top of the right rear/left front exhaust port. 1995-’97 Ranger, Explorer and ’97 AerostarThe 95TM-AD casting that came out in ’95 had the heart-shaped, fast-burn chambers that shrouded the intake valves. It was replaced by the 97TM casting in ’97, but it was the same, so they can be used interchangeably. These castings were used on the Ranger and Explorer from ’95 through ’97 and on the Aerostar in ’97. They can be identified by the letter “U” that’s located on the top of the right rear/left front exhaust port. Symptoms of Cracked Cylinder Head: Unexplained coolant lossOil pressure loss after starting and/or warming up. No heat; Low coolant. Poor idle; Misfire. Check Engine Light. Causes of Cracked Cylinder Head: Overheatinglack of maintenancelow coolantnot checking coolant, hoses, fan, thermostat regularl

(2) Dragway Tools B4000 4.0 Bare Cylinder Head for Ranger Explorer (Late Model)


(2) Dragway Tools B4000 4.0 Bare Cylinder Head for Ranger Explorer (Late Model)


$274.99


Set of (2) Late Model left and right 4.0 ClyindersHigh grade cast iron for additional strength Strengthened walls for durability Hardened exhaust valve seats with three angle profile Fully machined gasket surfaces Meets or exceeds O.E. specificationsRocker Arm Torque is 30 FT LBSFits the following modelsNo Core Return Required MakeYearModelTrimEngineFord1997AerostarAllAllFord1997ExplorerAllAllFord1998ExplorerAllAllFord1999ExplorerAllAllFord2000ExplorerAllAllFord2001ExplorerAllAllFord2002ExplorerAllAllFord2003ExplorerAllAllFord2004ExplorerAllAllFord2005ExplorerAllAllFord2006ExplorerAllAllFord1997RangerAllAllFord1998RangerAllAllFord1999RangerAllAllFord2000RangerAllAllFord2001RangerAllAllFord2002RangerAllAllFord2003RangerAllAllFord2004RangerAllAllFord2005RangerAllAllFord2006RangerAllAllMazda1997B4000Base Extended Cab Pickup 2-Door4.0L 4016CC V6 GAS OHV Naturally AspiratedMazda1997B4000Base Standard Cab Pickup 2-Door4.0L 4016CC V6 GAS OHV Naturally AspiratedMazda1997B4000SE Extended Cab Pickup 2-Door4.0L 4016CC V6 GAS OHV Naturally AspiratedMazda1998B4000SE Extended Cab Pickup 2-Door4.0L 4016CC V6 GAS OHV Naturally AspiratedMazda1998B4000SE Extended Cab Pickup 4-Door4.0L 4016CC V6 GAS OHV Naturally AspiratedMazda1999B4000SE Extended Cab Pickup 2-Door4.0L 4016CC V6 GAS OHV Naturally AspiratedMazda1999B4000SE Extended Cab Pickup 4-Door4.0L 4016CC V6 GAS OHV Naturally AspiratedMazda1999B4000SE Standard Cab Pickup 2-Door4.0L 4016CC V6 GAS OHV Naturally AspiratedMazda2000B4000SE Extended Cab Pickup 4-Door4.0L 4016CC V6 GAS OHV Naturally AspiratedMazda2000B4000Troy Lee Extended Cab Pickup 4-Door4.0L 4016CC V6 GAS OHV Naturally AspiratedFall Automotive is not affiliated with, or sponsored by, or authorized to represent, Original Equipment Manufacturers mentioned above. All references to OEM brands, trademarks, and/or model numbers are done solely for the purpose of identifying the aftermarket replacement parts provided by Fall Automotive. Ford® is a registered trademark

(2) Dragway Tools GM 6.5 Diesel 90 Degree Cylinder Heads fits Chevrolet & GMC


(2) Dragway Tools GM 6.5 Diesel 90 Degree Cylinder Heads fits Chevrolet & GMC


$439.99


Set of (2) 6.5 cylinder heads Nickle alloy material for longer durability Both intake and exhaust have hardened valve seat insertsReinforced ribs for additional strength Fully machined gasket surfaces Meets or exceeds O.E. specifications Fits the following modelsNo Core Return Required MakeYearModelTrimEngineChevrolet1992C2500AllAllChevrolet1993C2500AllAllChevrolet1994C2500AllAllChevrolet1995C2500AllAllChevrolet1996C2500AllAllChevrolet1997C2500AllAllChevrolet1998C2500AllAllChevrolet1999C2500AllAllChevrolet2000C2500AllAllChevrolet1992C3500AllAllChevrolet1993C3500AllAllChevrolet1994C3500AllAllChevrolet1995C3500AllAllChevrolet1996C3500AllAllChevrolet1997C3500AllAllChevrolet1998C3500AllAllChevrolet1999C3500AllAllChevrolet2000C3500AllAllChevrolet2001C3500AllAllChevrolet2002C3500AllAllGMC1994C1500AllAllGMC1995C1500AllAllGMC1996C1500AllAllGMC1997C1500AllAllGMC1998C1500AllAllGMC1992C2500AllAllGMC1993C2500AllAllGMC1994C2500AllAllGMC1995C2500AllAllGMC1996C2500AllAllGMC1997C2500AllAllGMC1998C2500AllAllGMC1999C2500AllAllGMC2000C2500AllAllGMC1992C3500AllAllGMC1993C3500AllAllGMC1994C3500AllAllGMC1995C3500AllAllGMC1996C3500AllAllGMC1997C3500AllAllGMC1998C3500AllAllGMC1999C3500AllAllGMC2000C3500AllAllGMC2001C3500AllAllGMC2002C3500AllAllFall Automotive is not affiliated with, or sponsored by, or authorized to represent, Original Equipment Manufacturers mentioned above. All references to OEM brands, trademarks, and/or model numbers are done solely for the purpose of identifying the aftermarket replacement parts provided by Fall Automotive. Ford® is a registered trademark of Ford Motor Company. Mazda® is a registered trademark Mazda Motor of America, Inc. d/b/a Mazda North American Operations. Chrysler®, Dodge®, Jeep®, Ram® are registered trademarks of FCA US LLC. GMC® and Chevrolet® is a registered trademark of General Motors.

(2) Replacement Carbon Brushes For SDT-RBC08 1 Electric Rebar Cutter


(2) Replacement Carbon Brushes For SDT-RBC08 1 Electric Rebar Cutter


$9.99


Replacement set of carbon brushes for the Steel Dragon Tools SDT-RBC08 1″ electric rebar cutter. Set contains two (2) carbon brushes. Set of two (2) replacement brushes for 1″ electric rebar cutterBrush Type: CarbonFits SDT-RBC08This product is designed and manufactured by Steel Dragon Tools®. Steel Dragon Tools® products are backed by a one (1) year warranty against manufacturer defect.

(2) Steel Dragon Tools 45025 Brush Holder fits RIDGID 300 535 Pipe Threading


(2) Steel Dragon Tools 45025 Brush Holder fits RIDGID 300 535 Pipe Threading


$18.99


Set of 2 Replacement SDT 300 Brush Holders – Fits SDT 300Fits RIDGID 300 & 535 Threader Machine Motor Replaces Ridgid Part Number: 45025This product is designed and manufactured by Steel Dragon Tools®. Steel Dragon Tools® products are backed by a one (1) year warranty against manufacturer defect.

(2) Steel Dragon Tools Motor Brushes for RBC06 3/4 Electric Rebar Cutter


(2) Steel Dragon Tools Motor Brushes for RBC06 3/4 Electric Rebar Cutter


$9.99


Steel Dragon Tools replacement set of carbon brushes for the Steel Dragon Tools SDT-RBC06 3/4″ electric rebar cutter. Set contains two (2) carbon brushes. Set of two (2) replacement brushes for 3/4″ electric rebar cutterBrush Type: CarbonFits SDT-RBC06This product is designed and manufactured by Steel Dragon Tools®. Steel Dragon Tools® products are backed by a one (1) year warranty against manufacturer defect.

(2.4mm) Stubby Collet (Set of 2)


(2.4mm) Stubby Collet (Set of 2)


$22.2


WCT2022: Features: -Price Is For One Each -Minimum Order Of 1-WELDCRAFT-UNSPC CODE: 23171500-TIG Torch Consumables TIG Torch Consumables welding support equipment collet body gas lens nozzle-3/32 COLLET, STUBBY.

(3) Andrew Mack Norris Trickster Pin Striper Brush Set Series M/NT Size 00-1


(3) Andrew Mack Norris Trickster Pin Striper Brush Set Series M/NT Size 00-1


$57.99


The Trickster is a striper with a handle length of 4-1/4″. Jim Norris helped design this brush and with his sign painting background likes the longer length of a brush handle. For the stripers that prefer a shorter handle the modification is quick and easy. The striper is made of pure blue squirrel hair and has a length out of 2-1/4″. The long length of the hair allows the brush to carry a good load of paint for a long distance. You can stand the brush up on the tip to create super fine lines even with the larger sizes. Sizes Includes: 00, 0 and 1Extended handle length of 4 1/4″Made of pure blue squirrel hairHair length 2 1/4″Longer hair length allows the brush to carry a good amount of paint for a long distance

(4) Dragway Tools 12 Hydraulic Wheel Dolly Vehicle Positioning Jack Lift Hoist


(4) Dragway Tools 12 Hydraulic Wheel Dolly Vehicle Positioning Jack Lift Hoist


$359.99


Dragway Tools introduces a set of hydraulic wheel dollies to easily move cars, trucks, trailers and boats around the garage or shop. Now one person can easily move a car or truck to create storage space. The red powder coated finish will look great for many years to come. Each dolly holds a maximum weight of 1500 pounds with a maximum width of 22 inches tires. These quality dollies are made from half inch steel and include 4 inch steel swivel wheels. A storage stand is available for storage of four wheel dollies. Powder coated red finish6″ Clearance HeightCapacity: 1500 lbs per dolly1/2″ Steel Frame4″ Swivel WheelsMaximum Width: 22″Minimum Width: 12″ (When Closed)Foot Print: 25″ x 17″ x 9″Weight: 41 lbs each1 Year Full Warranty

(4) REED 3507 HSI6-8 Cutting Wheel for H6 4-6 & H8 6-8 Hinged Pipe Cutters


(4) REED 3507 HSI6-8 Cutting Wheel for H6 4-6 & H8 6-8 Hinged Pipe Cutters


$99.99


Set of Four Hardened Steel Reed HSI6-8 Cutting WheelsBlade Exposure: .350″ (8.9mm)Application: Steel, Stainless Steel; Cast Iron; Ductile IronFits SDT-H6 4″-6″ Heavy Duty Hinged Pipe Cutter, SDT-H8 6″-8″ Pipe CutterFits Reed H6 & H8 Hinged Cutter

(4) REED 3508 HS8-12 Stainless Steel Cutting Wheel for H8 Hinged Pipe Cutters


(4) REED 3508 HS8-12 Stainless Steel Cutting Wheel for H8 Hinged Pipe Cutters


$106.99


Set of four (4) Reed 03508 HS8-12 hardened steel replacement cutting wheels. This wheel will fit Steel Dragon Tools H8 hinged pipe cutters, Reed H8 and H12 hinged pipe cutters, and Wheeler Rex 95081 and 95121 hinged pipe cutter. Specifications: Quantity: 4 PackBlade Exposure: 0.45 in. (11.4 mm)Application: Steel and Stainless SteelFits Steel Dragon Tools H8 heavy-duty, hinged pipe cutter. Fits Reed H8 and H12 hinged pipe cutter. Fits Wheeler Rex 95081 and 95121 pipe cutter.

(4.8mm) Gas Lens Collet Body (Set of 2)


(4.8mm) Gas Lens Collet Body (Set of 2)


$96.38


WCT2026: Features: -Price Is For One Each -Minimum Order Of 2-WELDCRAFT-UNSPC CODE: 23171500-TIG Torch Consumables TIG Torch Consumables welding support equipment collet body gas lens nozzle-GAS LENS 3/16(4.8MM).

(5) Andrew Mack Brush DC Micro Script Brush Series Size 000-2 Natural Hair


(5) Andrew Mack Brush DC Micro Script Brush Series Size 000-2 Natural Hair


$33.99


Andrew Mack DC Micro Script Brush Set by Dewayne Connot includes five (5) natural, pointed detail brushes. Perfect for fine lines and delicate details. Brush sizes: 3/0, 2/0, 0, 1, and 2.Features: Brush Sizes: 3/0, 2/0, 0, 1, 2Natural, pointed detail brush.

(6) Andrew Mack Brush Hannukaine Quill Brushes Series 79 Size XXS - XL


(6) Andrew Mack Brush Hannukaine Quill Brushes Series 79 Size XXS – XL


$39.99


Andrew Mack John Hannukaine Quill Series Brush Set is made up of six (6)brushes ranging from XXS to XL. Offersnice edges and lots of snap. Bristles are a mixture ofsquirrel and taklon hair. Package Includes: XXS – Similar to a Size #2 Graduated QuillXS – Similar to a Size #3 Graduated QuillS – Similar to a Size #4 Graduated QuillM – Similar to a Size #6 Graduated QuillL – Similar to a Size #8 Graduated QuillXL – Similar to a Size #10 Graduated Quill

(6) Andrew Mack Brush Sword Striper Series 20 Pin Striping Brush Set


(6) Andrew Mack Brush Sword Striper Series 20 Pin Striping Brush Set


$59.99


Andrew Mack Sword Striper Series 20 Pinstriping Squirrel Hair Brush Set includes brush sizes 00, 0, 1, 2, 3, and 4. These brushes are ideal for touch-up and pinstriping work. Series 20 Brushes are lacquer, enamel, and water resistant. Features: Sizes: 00 – 4Hair Length: 2 in. America’s number one automotive touch up brush. Squirrel hair bristles. Lacquer and enamel resistant. Sword style is the best for all-around work. Excellent for auto body touch-up and pinstriping. Dark green thread ferrule. Brush Sizes: Size 00: 7/32-inch Head WidthSize 0: 1/4-inch Head WidthSize 1: 5/16-inch Head WidthSize 2: 13/32-inch Head WidthSize 3: 1/2-inch Head WidthSize 4: 9/16-inch Head Width

(6) Andrew Mack Brush Sword Striping Series 10 Sizes 000-3 Pinstriping Brushes


(6) Andrew Mack Brush Sword Striping Series 10 Sizes 000-3 Pinstriping Brushes


$69.99


Set of 6 Series 10 Sword Striper Brushes Size 000-3Handcrafted and shaped as it was many years agoThe original mack Series 10 sword striping brushDesigned for pinstriping, design and scroll workExtra attention given to quality control with respect to shape and cleaningThe very finest grade of blue squirrel100% unmixed blue squirrel hair Blue thread ferrule Includes: (1) Size 000, 3/16″ Head Width(1) Size 00, 7/32″ Head Width(1) Size 0, 1/4″ Head Width(1) Size 1, 5/16″ Head Width(1) Size 2, 13/32″ Head Width(1) Size 3, 1/2″ Head Width

(7) Andrew Mack Squirrel Hair Broadliner Series 40 Size 00-5 Touch Up Brushes


(7) Andrew Mack Squirrel Hair Broadliner Series 40 Size 00-5 Touch Up Brushes


$114.99


The series 40 broadliner/moulding series brushes are adapted for broad lines, the size depending upon the width of line desired. Also good for blacking off mouldings, chair and table legs, refrigerator bottoms, and other sectional areas. Makes a great fill in brush on a wide graphics (can replace a quill or stroke brush). Used on the edge, each size makes a slightly narrower line that when used flat. Universal for touch-up, for background work, and varnishing limited areas. Set of 7 Series 40 Broadliner Brushes Size 00-5Hair Length: 2″Squirrel hair broadliners Series 40 Adapted for broad lines and blacking off mouldingsFinest quality squirrel hairLacquer resistantExcellent touch-up brushGreat for wide line graphicsDark green thread ferrule Includes: (1) Size 00, 7/32″ Head Width(1) Size 0, 1/4″ Head Width(1) Size 1, 5/16″ Head Width(1) Size 2, 13/32″ Head Width(1) Size 3, 1/2″ Head Width(1) Size 4, 9/16″ Head Width(1) Size 5, 5/8″ Head Width

(LIS) #5 Tap Socket for 5/16, 7/16in and 7 and 8mm Taps - Lisle - 70600


(LIS) #5 Tap Socket for 5/16, 7/16in and 7 and 8mm Taps – Lisle – 70600


$8


IJO1483: Features: 5 Tap Socket for 5/16, 7/16in and 7 and 8mm Taps. Warranty: -Lifetime warranty does not cover abuse.

(Mt6487672) 1/4 Drive 6 Point Deep Socket


(Mt6487672) 1/4 Drive 6 Point Deep Socket


$6.03


1/4 Drive & 3/8 Deep Socket.

Leave a comment

Your comment