Transfer Hot



Transfer Hot
Wood is a poor conductor, which means that heat is slow to transfer–even when wood is very hot. Why can?

firewalkers safely walk barefoot on red-hot wooden coals, but not safely walk barefoot on red-hot pieces of iron?

The red hot bit that touches the foot transfers some heat to the foot. The foot warms up, the wood cools down. The wood cools enough so that the foot doesn’t get enough heat to hurt it. That takes a short amount of time – of the order of 0.2 s. The hot wood which is now under the cool surface starts to transfer heat to the cool surface bit, but wood is a poor conductor and the reheating of the surface takes some time – about 0.4 s. Meanwhile the ( now slightly warmer ) foot has lifted off and move on. – the foot can do this about twice in two seconds before the added heat starts to damage the skin.
Red hot iron – the surface cools just the same as the wood when the foot lands on it, but it reheats within 1/100 of a second because of the good conductivity of metal.

EDIT – if they are both red hot they have the same temperature.

How to Apply Hot Fix Swarovski Rhinestones Using Hot Fix Transfer Paper



0.37 Dia 2 Long Water Heating Head AC 220V 250W Cartridge Heater


0.37 Dia 2 Long Water Heating Head AC 220V 250W Cartridge Heater


$7.64


Specification: Product NameCartridge HeaterMaterialStainless Steel, PVC, NylonRated VoltageAC 220VPower250WHeater Size (Approx.)9.5 x 50mm / 0.37″ x 2″ (D * L)Wire Length (Approx.)26cm / 10.2″ColorWhite, Silver ToneWeight26gPackage Content1 x Cartridge HeaterSpecially designed for heating applications, such as molds, dies, hot plates, platens etc. Provides high heat transfer, stainless steel heater is corrosion resistant.

0.37 Dia 4.9 Long Water Heating Head AC 220V 500W Cartridge Heater


0.37 Dia 4.9 Long Water Heating Head AC 220V 500W Cartridge Heater


$9.11


Specification: Product NameCartridge HeaterMaterialStainless Steel, PVC, NylonRated VoltageAC 220VPower500WHeater Size (Approx.)9.5 x 125mm / 0.37″ x 4.9″ (D * L)Wire Length (Approx.)26cm / 10.2″ColorWhite, Silver ToneWeight44gPackage Content1 x Cartridge HeaterSpecially designed for heating applications, such as molds, dies, hot plates, platens etc. Provides high heat transfer, stainless steel heater is corrosion resistant.

0.39 Dia 4.9 Long Water Heating Head AC 220V 500W Cartridge Heater


0.39 Dia 4.9 Long Water Heating Head AC 220V 500W Cartridge Heater


$6.91


Specially designed for heating applications, such as molds, dies, hot plates, platens etc. Provides high heat transfer, stainless steel heater is corrosion resistant.

1 Port Low Profile PCI Parallel Adapter


1 Port Low Profile PCI Parallel Adapter


$53.17


The PCI1P LP 1 Port Low Profile PCI Parallel Adapter Card adds one IEEE 1284 port to your small form factor PC, with data transfer speeds of up to 1.5 Mbps? up to 3 times faster than on-board parallel ports. The adapter card features a low profile design that is suited to small form factor computer cases, while including a full height bracket to adapt to any installation. Installation is a breeze with plug and play support and drivers for Windows 7, Vista, XP, ME, 2000, 98, 95, NT4, DOS and Linux. IRQ sharing and hot swapping capabilities guarantee convenient, hassle-free connections to any parallel peripheral. Backed by a StarTech.com lifetime warranty and free lifetime technical support.

10'A-B USB Cable Version 2.0


10′A-B USB Cable Version 2.0


$19.99


Premium high-speed USB v2.0 certified cables- Supports 1.5/12/480 Mbps transfer? hot-swappable- Backward-compatible with USBv1.1 devices- Flexible PVC jacket? molded construction- USB Type A male to Type B male connectors- UL Listed

1000BASE-LX SFP SMF F/JUNIPER 1310NM 10KM LC 100% COMPATIBLE


1000BASE-LX SFP SMF F/JUNIPER 1310NM 10KM LC 100% COMPATIBLE


$79.47


Product Name: Juniper SRX-SFP-1GE-LX Compatible 1000Base-LX SFP Marketing Information: AddOn’s industry-standard 1000Base-LX SFP is a hot-swappable input/output device that plugs into a Gigabit Ethernet slot, linking the port with the fiber-optic network. AddOn transceivers (GBIC, SFP, XFP and XENPAK) are 100% compliant for all of our networking product lines and are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance. SRX-SFP-1GE-LX-AOK is a KIT part (Actual Part Shipped: EX-SFP-1GE-LX-AO). Product Type: SFP (mini-GBIC) Application/Usage: Optical Network, Data Networking Interfaces/Ports: 1 x 1000Base-LX Interfaces/Ports Details: 1 x LC 1000Base-LX Network Connectivity Media: 9/10 m Single-mode Optical Fiber 1000Base-LX Data Transfer Rate: 1 Gbps Gigabit Ethernet Dimensions: 0.3″ Height x 0.5″ Width x 2.2″ Depth Weight (Approximate): 2.40 oz Compatibility: Netgear Switches: ProSafe 12 Port Gigabit Managed Switch – GSM7212, ProSafe 12-Port Layer 3 Managed Gigabit Switch – GSM7312, ProSafe 16-port Gigabit Smart Switch – GS716T, ProSafe 24 Port 10/100 Smart Switch 2 Gigabit Ports – FS726T, ProSafe 24 Port 10/100 Smart Switch 2 Gigabit Ports and 12 Port PoE – FS726TP, ProSafe 24 SFP Gigabit L3 Managed Stackable Switch – GSM7328FS, ProSafe 24-Port Feature Rich Gigabit Ethernet L2 Managed Switch – GSM7224R, ProSafe 24-port Gigabit Rackmount Switch with 2 SFP Slots – JGS524F, ProSafe 24-port Gigabit Smart Switch – GS724T, ProSafe 24-port Gigabit Smart Switch 10/100 Smart Switch with + 4 Gigabit Ports – FS728TP, ProSafe 24-port Gigabit Smart Switch 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports – FS724TP, ProSafe 24-port Gigabit Smart Switch 10/100/1000 Smart PoE Switch – GS724TP, ProSafe 24-port Gigabit Smart Switch with Advanced Features

1000BASE-LX SMF SFP LC 1310NM 10KM 100% COMPATIBLE


1000BASE-LX SMF SFP LC 1310NM 10KM 100% COMPATIBLE


$77.12


Brand Name: AddOncomputer.com Product Name: SFP Transceiver Module Marketing Information: AddOn’s industry-standard SFP is a hot-swappable input/output device that plugs into a Gigabit Ethernet slot, linking the port with the fiber-optic network. AddOn’s transceivers (GBIC, SFP, XFP and XENPAK) are 100% compliant for all of our networking product lines. AddOn transceivers are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance. Product Type: SFP (mini-GBIC) Application/Usage: Optical Network, Data Networking Interfaces/Ports: 1 x 1000Base-LX Interfaces/Ports Details: 1 x LC Duplex 1000Base-LX Network Connectivity Media: Single-mode Optical Fiber 1000Base-LX Data Transfer Rate: 1.25 Gbps Gigabit Ethernet Dimensions: 0.3″ Height x 0.5″ Width x 2.2″ Depth Weight (Approximate): 2.40 oz Compatibility: TRENDnet Switches: TEG-160WS, TEG-2248WS, TEG-240WS, TEG-424WS, TEG-448WS, TEG-S081FMi, TEG-S2620is, TEG-S3M2MG, TEG-S811Fi

1000BASE-TX COPPER SFP LINKSYS RJ45 FULL DUPLEX KIT PART W/SFP-TX


1000BASE-TX COPPER SFP LINKSYS RJ45 FULL DUPLEX KIT PART W/SFP-TX


$79.47


Product Model: MGBT1 Product Name: Linksys MGBT1 Compatible 1000Base-T SFP KIT Marketing Information: KIT PART Actual part shipped SFP-TX. ACP’s industry-standard SFP is a hot-swappable input/output device that plugs into a Gigabit Ethernet slot, linking the port with the fiber-optic network. ACP’s transceivers (GBIC, SFP, XFP and XENPAK) are 100% compliant for all of our networking product lines. ACP transceivers are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance. Product Type: SFP (mini-GBIC) Application/Usage: Data Networking Interfaces/Ports: 1 x 1000Base-T LAN Interfaces/Ports Details: 1 x RJ-45 1000Base-T Network LAN Connectivity Media: Category 5 Twisted Pair 1000Base-T Data Transfer Rate: 1 Gbps Gigabit Ethernet Compatibility: Cisco Linksys 100 Series Switch – SD2008T, 100 Series Switch – SR2024CT, 100 Series Switch – SR2024T, EtherFast 10/100 16-Port Workgroup Switch – EZXS16W, EtherFast 10/100 5-Port Workgroup Switch – EZXS55W, EtherFast 10/100 8-Port Workgroup Switch – EZXS88W, EtherFast 3124 24-Port 10/100 Ethernet Switch – EF3124, EtherFast 4116 16-Port 10/100 Ethernet Switch – EF4116, EtherFast 4124 24-Port 10/100 Ethernet Switch – EF4124, Gigabit 5-Port Workgroup Switch – EG005W, Gigabit 8-Port Workgroup Switch – EG008W

10GBASE-SR SFP+ MMF F/JUNIPER 850NM 300M LC 100% COMPATIBLE


10GBASE-SR SFP+ MMF F/JUNIPER 850NM 300M LC 100% COMPATIBLE


$314.62


Brand Name: AddOncomputer.com Product Name: Juniper SFPP-10GE-SR Compatible 10GBase-SR SFP+ Marketing Information: AddOn’s industry-standard SFP+ is a hot-swappable input/output device that plugs into a Gigabit Ethernet slot, linking the port with the fiber-optic network. AddOn’s transceivers (GBIC, SFP, XFP and XENPAK) are 100% compliant for all of our networking product lines. AddOn transceivers are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance. SFPP-10GE-SR-AOK is a KIT part (Actual part shipped: EX-SFP-10GE-SR-AO). Product Type: SFP+ Application/Usage: Data Networking, Optical Network Interfaces/Ports: 1 x 10GBase-SR Interfaces/Ports Details: 1 x LC 10GBase-SR Network Connectivity Media: 62.5 m Multi-mode Optical Fiber 10GBase-SR Data Transfer Rate: 10 Gbps Gigabit Ethernet Compatibility: Juniper EX2500 Ethernet Switch

10GBase-SR SFP+ Transceiver


10GBase-SR SFP+ Transceiver


$680.68


Brand Name: Cisco Product Model: SFP-10G-SR Product Name: 10GBase-SR SFP+ Transceiver Marketing Information: The Cisco 10GBase-SR SFP+ module offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco 10GBase-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible. Product Type: SFP+ Technical Information Application/Usage: Data Networking Interfaces/Ports Interfaces/Ports: 1 x 10GBase-SR Interfaces/Ports Details: 1 x LC Duplex 10GBase-SR Media & Performance Connectivity Media: 62.5 m Multi-mode Optical Fiber Connectivity Media: 50 m Multi-mode Optical Fiber Data Transfer Rate: 10 Gbps Gigabit Ethernet Physical Characteristics Form Factor: Hot-swappable Dimensions: 0.3″ Height x 0.5″ Width x 2.2″ Depth Weight (Approximate): 2.65 oz Miscellaneous Additional Information: Spare Product Distance 300 m Wavelength: 850 nm Compatibility: Cisco Nexus 5000 Series Switches Cisco Nexus 7000 Series Switches

10mm x 125mm Red Dual Wire Industrial Heating Cartridge Heater 220V 500W


10mm x 125mm Red Dual Wire Industrial Heating Cartridge Heater 220V 500W


$8.63


Specification: Product NameCartridge HeaterRated Voltage220VPower500WHeater Size (Approx.)10 x 125mm / 0.4″ x 5″ (D * L)Wire Length (Approx.)25.5cm /10″MaterialMetal, PVCColorRed, Silver ToneWeight52gPackage Content1 x Cartridge HeaterSpecially designed for heating applications, such as molds, dies, hot plates, platens etc. Provides high heat transfer, stainless steel heater is corrosion resistant.

10mm x 14mm Silicone Food Grade Tube Beer Water Air Pump Hose Pipe 1 Meter Long


10mm x 14mm Silicone Food Grade Tube Beer Water Air Pump Hose Pipe 1 Meter Long


$8.27


Descriptions: 1. Silicone tubing in platinum cured translucent is designed for a variety of pump and transfer applications including pharmaceutical, laboratory, bioprocess manufacturing and food and beverage applications. The tubes are able to withstand a high temperature of 200C (intermittent) and are available in various internal diameters and wall thickness. 2. Platinum cured Silicone has a number of advantages over conventional peroxide cured Silicones including: -Non Yellowing. -No Peroxide by-products. -High tear strength as standard. -High gloss finish. -Excellent clarity. -Highly hydrophobic. -Extended life in Peristaltic pumps. -Platinum cured Silicone has WRAS approval for hot and cold drinking water and is FDA approved. For CALIFORNIA residents only: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains’ products, the exposure to these chemicals may be of no significant risk to you, but out of caution, we have elected to place this warning on our site to make sure our customers are informed. You can find more infomation at http://www. oehha. ca.gov/proposition-65/about-proposition-65.

10mm x 280mm 220V Voltage 400 Watt Power Cartridge Heater Heating Element


10mm x 280mm 220V Voltage 400 Watt Power Cartridge Heater Heating Element


$9.58


Specification: Product Name Cartridge Heater Material Stainless Steel, PVC, Nylon Rated Voltage AC 220V Power 400W Heater Size (Approx.) 10 x 280mm / 0.4″ x 11″ (D * L ) Wire Length(Approx.) 30.5cm / 12″ Color Silver Tone, Red Net Weight 118g Package Content 1 x Cartridge Heater Specially designed for heating applications, such as injection molding machine, dies, hot plates, platens, etc. Provides high heat transfer, stainless steel heater is corrosion resistant. Note: Please pay attention to the voltage before ordering to make sure the item can working successfully in your area.

10mm x 80mm 220V 400 Watt Power Cartridge Heater Heating Element


10mm x 80mm 220V 400 Watt Power Cartridge Heater Heating Element


$7.89


Specification: Product Name Cartridge Heater Material Stainless Steel, PVC, Nylon Rated Voltage AC 220V Power 400W Heater Size (Approx.) 10 x 80mm / 0.39″ x 3.1″ (D * L ) Wire Length(Approx.) 26.5cm / 10.4″ Color Silver Tone, Red, White Weight 38g Package Content 1 x Cartridge Heater Specially designed for heating applications, such as injection molding machine, dies, hot plates, platens, etc. Provides high heat transfer, stainless steel heater is corrosion resistant.

10mmx50mm AC 220V 200W Ceramic Cartridge Wire Heater Heating Element


10mmx50mm AC 220V 200W Ceramic Cartridge Wire Heater Heating Element


$7.17


High heat transfer cartridge tube, 2 wires, corrosion resistant stainless steel heater. Single head 2-wire, Specially designed for heating applications, such as injection molding machine, dies, hot plates, platens, etc. It is widely used in heating metal mold, moulds and dies, hot mould core box, vacuum equipments, bolt heating element, high-temperature equipments, hot stamping, etc.

12mm x 120mm 220V 500 Watt Power Cartridge Heater Heating Element


12mm x 120mm 220V 500 Watt Power Cartridge Heater Heating Element


$10.8


Specification: Product NameCartridge HeaterMaterialStainless Steel, PVC, NylonRated VoltageAC 220VPower500WHeater Size (Approx.)12 x 120mm / 0.47″ x 4.7″ (D * L )Wire Length(Approx.)27.5cm / 10.8″ColorSilver Tone, RedWeight40gPackage Content1 x Cartridge HeaterSpecially designed for heating applications, such as injection molding machine, dies, hot plates, platens, etc. Provides high heat transfer, stainless steel heater is corrosion resistant.

12V FACET GOLD-FLO FUEL PUMP ALL CARBURETED ENGINES JOHN DEERE AH130127MOD


12V FACET GOLD-FLO FUEL PUMP ALL CARBURETED ENGINES JOHN DEERE AH130127MOD


$149.49


PRODUCT SPECIFICATIONS: FACET FUEL PUMPS 40007E, 40007N, 40007, 40134 JOHN DEERE AH130127MOD – PRODUCT NOTICE: As a parts distributor we mostly sell aftermarket parts (any OEM parts would be noted as such). Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but are designed to function the same as – if not better than – the original. All parts sold are new. – FITS THE FOLLOWING APPLICATIONS: OEM(S): FACET FUEL PUMPS VOLTAGE: 12 FEATURES: COMPATIBLE – WITH DIESEL FUEL, GASOHOL OR PURE ALCOHOL. RELIABLE – ENDURANCE TESTED TO NEARLY DOUBLE THAT OF NEAREST COMPETITOR. EASY TO INSTALL & SERVICE. ELIMINATES VAPOR LOCK – FOR CONSTANT, SMOOTH FUEL DELIVERY ON HOT DAYS & HIGH ALTITUDES. PRESSURE RELIEF – ELIMINATES FLOODING & ASSURES SATISFACTORY RESTARTING ON THE HOTTEST DAYS. CORROSION RESISTANT – THE ALL STEEL CASE IS PLATED TO PROVIDE OVER 100 HOURS OF SALT SPRAY RESISTANCE PER INDUSTRY & MILITARY SPECIFICATIONS FILTER SPECIFICATIONS: NYLON 74U FITTING TYPE: 1/4-18 INTERNALLY THREADED GPH: 36 MIN DRY LIFT: 24IN / 60.96CM MAX SHUTOFF PRESSURE: 5.5 PSI MIN SHUTOFF PRESSURE: 4 PSI INCLUDES POSITIVE SHUTOFF VALVE?: NO INCLUDES CHECK VALVE?: NO INCLUDES QUIET VALVE?: NO PACKAGING: BOX APPLICATION: ALL CARBURETOR-EQUIPPED CARS, VANS & LIGHT TRUCKS, STATIONARY ENGINES, GEN-SETS, FUEL PRIMING & TRANSFER APPLICATIONS WEIGHT: 1.735 LBS / 0.79 KG

12V FACET POSI-FLO a SOLID STATE FUEL PUMP CARBURETED ENGINES FACET FEP04SV


12V FACET POSI-FLO a SOLID STATE FUEL PUMP CARBURETED ENGINES FACET FEP04SV


$59.9


PRODUCT SPECIFICATIONS: FACET FEP04SV, PRO04SV, 60104N, 60245N, 40104N, 40105N, 50104N – PRODUCT NOTICE: As a parts distributor we mostly sell aftermarket parts (any OEM parts would be noted as such). Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but are designed to function the same as – if not better than – the original. All parts sold are new. – FITS THE FOLLOWING APPLICATIONS: OEM(S): FACET FUEL PUMPS VOLTAGE: 12 PART & CROSS REFERENCE NUMBERS: FACET FEP04SV, PRO04SV, 60104N, 60245N, 40104N, 40105N, 50104N FEATURES: COMPATIBLE – WITH LEADED OR UNLEADED GASOLINE, DIESEL FUEL, BLENDED FUELS, PURE ALCOHOL & FUEL ADDITIVES. RELIABLE – NO ELECTRICAL CONTACTS, BEARINGS, RUBBER DIAPHRAGMS OR VALVES TO WEAR OUT OR FATIGUE. EASY TO INSTALL & SERVICE. ELIMINATES VAPOR LOCK – FOR CONSTANT, SMOOTH FUEL DELIVERY ON HOT DAYS & HIGH ALTITUDES. PRESSURE RELIEF – ELIMINATES FLOODING & ASSURES SATISFACTORY RESTARTING ON THE HOTTEST DAYS. CORROSION RESISTANT – THE PLASTIC CASING IS DESIGNED TO PROVIDE OVER 100 HOURS OF SALT SPRAY RESISTANCE. SELF-PRIMING – TO 12 INCHES OF FUEL LIFT. FITTING TYPE: 1/8-27 INTERNALLY THREADED GPH: 23 MIN DRY LIFT: 12IN / 30.48CM MAX SHUTOFF PRESSURE: 4 PSI MIN SHUTOFF PRESSURE: 1.5 PSI NEGATIVE LEADS: 0.25″ RING TERMINAL INCLUDES POSITIVE SHUTOFF VALVE?: NO INCLUDES CHECK VALVE?: NO INCLUDES QUIET VALVE?: NO PACKAGING: BOX NOTES: POSI-FLO™ SOLID STATE FUEL PUMP SELF-PRIMING ELIMINATES VAPOR LOCK & NO FLOODING INSURES RESTART ON THE HOTTEST DAYS INCLUDES (2) STRAIGHT FUEL FITTINGS APPLICATION: ALL CARBURETOR-EQUIPPED CARS, VANS & LIGHT TRUCKS, STATIONARY ENGINES, GEN-SETS, FUEL PRIMING & TRANSFER APPLICATIONS WEIGHT: 0.9 LBS / 0.41 KG

12V FACET POSI-FLO a SOLID STATE FUEL PUMP KIT CARBURETED ENGINE FACET 50106N


12V FACET POSI-FLO a SOLID STATE FUEL PUMP KIT CARBURETED ENGINE FACET 50106N


$59.86


PRODUCT SPECIFICATIONS: FACET FUEL PUMPS 50106N, FEP12SV – PRODUCT NOTICE: As a parts distributor we mostly sell aftermarket parts (any OEM parts would be noted as such). Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but are designed to function the same as – if not better than – the original. All parts sold are new. – FITS THE FOLLOWING APPLICATIONS: OEM(S): FACET FUEL PUMPS VOLTAGE: 12 PART & CROSS REFERENCE NUMBERS: FACET 60106N, 60106E, 40106N, FEP06V, PRO06SV FEATURES: COMPATIBLE – WITH LEADED OR UNLEADED GASOLINE, DIESEL FUEL, BLENDED FUELS, PURE ALCOHOL & FUEL ADDITIVES. RELIABLE – NO ELECTRICAL CONTACTS, BEARINGS, RUBBER DIAPHRAGMS OR VALVES TO WEAR OUT OR FATIGUE. EASY TO INSTALL & SERVICE. ELIMINATES VAPOR LOCK – FOR CONSTANT, SMOOTH FUEL DELIVERY ON HOT DAYS & HIGH ALTITUDES. PRESSURE RELIEF – ELIMINATES FLOODING & ASSURES SATISFACTORY RESTARTING ON THE HOTTEST DAYS. CORROSION RESISTANT – THE PLASTIC CASING IS DESIGNED TO PROVIDE OVER 100 HOURS OF SALT SPRAY RESISTANCE. SELF-PRIMING – TO 12 INCHES OF FUEL LIFT. FILTER SPECIFICATIONS: N/A FITTING TYPE: 1/8-27 INTERNALLY THREADED GPH: 25 MIN DRY LIFT: 12IN / 30.48CM MAX SHUTOFF PRESSURE: 7 PSI MIN SHUTOFF PRESSURE: 4 PSI NEGATIVE LEADS: 0.25″ RING TERMINAL INCLUDES POSITIVE SHUTOFF VALVE?: NO INCLUDES CHECK VALVE?: NO INCLUDES QUIET VALVE?: NO PACKAGING: CLAMSHELL NOTES: POSI-FLOTM SOLID STATE FUEL PUMP KIT INCLUDES THE 60106N PUMP & (2) EACH OF STRAIGHT FITTINGS, BOLTS, NUTS & LOCK WASHERS SELF-PRIMING ELIMINATES VAPOR LOCK & NO FLOODING INSURES RESTART ON THE HOTTEST DAYS APPLICATION: ALL CARBURETOR-EQUIPPED CARS, VANS & LIGHT TRUCKS, STATIONARY ENGINES, GEN-SETS, FUEL PRIMING & TRANSFER APPLICATIONS WEIGHT: 0.94 LBS / 0.43 KG

12V FACET POSI-FLO a SOLID STATE FUEL PUMP KIT CARBURETED ENGINES FACET 60104


12V FACET POSI-FLO a SOLID STATE FUEL PUMP KIT CARBURETED ENGINES FACET 60104


$59.86


PRODUCT SPECIFICATIONS: FACET FUEL PUMPS 50104N, 60104, FEP42SV MISCELLANEOUS VENDOR EP42S – PRODUCT NOTICE: As a parts distributor we mostly sell aftermarket parts (any OEM parts would be noted as such). Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but are designed to function the same as – if not better than – the original. All parts sold are new. – FITS THE FOLLOWING APPLICATIONS: OEM(S): FACET FUEL PUMPS VOLTAGE: 12 PART & CROSS REFERENCE NUMBERS: FACET FEP04SV, PRO04SV, 60104N, 60245N, 40104N, 40105N, 50104N FEATURES: COMPATIBLE – WITH LEADED OR UNLEADED GASOLINE, DIESEL FUEL, BLENDED FUELS, PURE ALCOHOL & FUEL ADDITIVES. RELIABLE – NO ELECTRICAL CONTACTS, BEARINGS, RUBBER DIAPHRAGMS OR VALVES TO WEAR OUT OR FATIGUE. EASY TO INSTALL & SERVICE. ELIMINATES VAPOR LOCK – FOR CONSTANT, SMOOTH FUEL DELIVERY ON HOT DAYS & HIGH ALTITUDES. PRESSURE RELIEF – ELIMINATES FLOODING & ASSURES SATISFACTORY RESTARTING ON THE HOTTEST DAYS. CORROSION RESISTANT – THE PLASTIC CASING IS DESIGNED TO PROVIDE OVER 100 HOURS OF SALT SPRAY RESISTANCE. SELF-PRIMING – TO 12 INCHES OF FUEL LIFT. FILTER SPECIFICATIONS: N/A FITTING TYPE: 1/8-27 INTERNALLY THREADED GPH: 25 MIN DRY LIFT: 12IN / 30.48CM MAX SHUTOFF PRESSURE: 4 PSI MIN SHUTOFF PRESSURE: 1.5 PSI NEGATIVE LEADS: 0.25″ RING TERMINAL INCLUDES POSITIVE SHUTOFF VALVE?: NO INCLUDES CHECK VALVE?: NO INCLUDES QUIET VALVE?: NO PACKAGING: CLAMSHELL NOTES: POSI-FLOTM SOLID STATE FUEL PUMP KIT INCLUDES THE 60104N PUMP & (2) EACH OF STRAIGHT FITTINGS, BOLTS, NUTS & LOCK WASHERS SELF-PRIMING ELIMINATES VAPOR LOCK & NO FLOODING INSURES RESTART ON THE HOTTEST DAYS APPLICATION: ALL CARBURETOR-EQUIPPED CARS, VANS & LIGHT TRUCKS, STATIONARY ENGINES, GEN-SETS, FUEL PRIMING & TRANSFER APPLICATIONS WEIGHT: 0.94 LBS / 0.43 KG

Leave a comment

Your comment